Asetek Forte® S-Series Brake & Throttle

The Asetek Forte® S-Series Brake & Throttle, as you may know, is essentially the Forte Sim Racing Brake and Throttle separated.

This version of the Forte Sim Racing Pedals allows you to adjust the distance between the throttle and brake. It can be connected with a single cable.

If you're looking for the feel of the best racing car brake pedal without using full hydraulics, look no further! The Forte brake pedal is adjustable from soft to hard and maintains its setting. The Asetek SimSports M.L.C.P.C (Mechanical Load Cell Powered Cylinder) brake cylinder provides a real racing car driving experience, even without a full hydraulic system. This Sim Racing pedal set is Made in Denmark, with design, engineering, and assembly all done in Denmark.

The brake cylinder is equipped with a custom load cell sensor that detects changes in force applied to the pedal face, with up to 180kg of force possible on the pedal face (hard elastomer 4000N compression 12mm/2nd stage activation).

Additionally, the load cell sensor is geared so that any user, from those preferring soft to hard elastomers, can fully experience the precision of the load cell from the moment they release the pedal to the second stage.

The Forte S-Series Brake and Throttle are designed with the user experience in mind. All adjustment elements are intuitive and mostly tool-less for immediate use. Moreover, the Forte Sim Pedals come with advanced adjustment features, allowing you to change the pedal travel and stiffness to your liking, just like a race car driver.

Additionally, with the Asetek SimSports RaceHub™ software and the ability to freely set the distance between pedals, you can create an infinitely unique Sim Racing setup.
The Forte S-Series Brake and Throttle are compatible with the Invicta clutch system.

Technical specifications

• Sophisticated, sharp, and minimal Danish industrial design
• Made in Denmark
• Adjustable pedal stops
• Adjustable travel settings
• All-black anodized pedal base, pedal arms, with CNC machined contrast cut
• The all-black anodized aluminum smooth & sock-friendly pedal plates are comfortable for hours of use. Pedal plates are vertically adjustable
• Pedal base with heel rest and RGB LED, adjustable, dimmable, and can be completely turned off via RaceHub™ software
• Calibrations done in RaceHub are automatically saved to EPROM (Erasable Programmable Read-Only Memory). As a result, calibrations (pressure, dead zones, etc.) are saved per simulator or game (in games, you must set the values for 0 and 100%)
• Whether using 2 or 3 pedals, there's only one USB connection from the pedal base to the PC
• All adjustable mechanical features are colored orange by default
• Proprietary electronics with 16-bit resolution
• It's easy to add a clutch pedal to the Forte throttle & brake combo
• Sustainable manufacturing method that 100% recycles waste on-site
• Designed and tested for over 1 million activations, far exceeding racing car specs

• Experience driving a real racing car with the patent-pending M.L.C.P.C.™ (Mechanical Load Cell Powered Cylinder) brake cylinder
• Aluminum die-cast zero-play pedal arm with long-life ball bearings and bronze bushings at the clevis pivot point
• Sustainable manufacturing method that 100% recycles waste on-site
• Two-stage system that simulates the hard and soft stages of an actual racing car
• Adjusts stiffness with three types of elastomers, incorporating a physical stop and expansion chamber to replicate the feel of a racing car while not overloading the elastomers
• Manual adjustment of initial touch stiffness to replicate the distance feel between brake pads and discs
• The load cell detects up to 180kg of force on the pedal plate
• The pedal arm is designed to withstand 200kg of force and up to 700kg of burst pressure

• Aluminum die-cast zero-play pedal arm incorporates long-life ball bearings and bronze bush in the clevis pivot point
• Sustainable manufacturing method that recycles 100% of waste material on-site
• A 16-bit magnetic Hall TPS (Throttle Position Sensor) that requires no mechanical wear and no maintenance
• Customize the throttle curve to mimic the throttle opening of a real race car with RaceHub™ software, allowing for 100% customization. For example, you can set a linear curve for dry conditions and a progressive curve for wet conditions
• Adjustable pedal stiffness
• Adjustable pedal travel
• Adjustable pedal stop
• Spring swap option for greater variation in stiffness
• The pedal arm is designed to withstand 200kg of force and up to 700kg of burst pressure