Skip to content

About the TR One Wheel Mounting System

The TR One Wheel System will allow you to purchase updated wheel mounts that fit the base (and most expensive) part of the kit. 

The base kit (Part Number: TR80-NWMA) consists of 2 High-Quality 80x40mm Aluminium Profiles and 4 Red Anodised Aluminium Plates. Optional wheel mounts include a wheel deck and direct-drive front mounting plate. The plates themselves are extremely rigid and have a lot of adjustment for angle and forward/backwards fine-tuning - to get a perfect position!

Optional - Select from Drop Down Menu

  • Seat Mounting Brackets
  • Recommended Accessories
  • Trak Racer Premium Race Seat

Customise your Rig with an Unbeatable Product Range

 

Frame/Chassis Features

  • Unique curved design with Trak Racer proprietary profile connector
  • Constructed from high quality extruded aluminium
  • 580mm wide and 1,400mm long (including 780mm profile, 500mm profile and Trak Racer's proprietary profile connector)
  • Low ground clearance with hardwood rubber floor protectors
  • Finished in black anodized high-quality aluminium

Adjustable Pedal Mount Features - Select your preferred mounting plate

  • Unique Bracket Design allows you to position the pedal low or in a high position and also slide for fine-tuning
  • Thick, no-flex Carbon Steel Construction OR Aluminium Profile with included Heel Rest
  • Pre-drilled mounting points for all major brand pedals OR mount your pedals directly to the profile

Optional Bucket or Recline Seat - Select a Seat and Seat Brackets from the Options

Select from the range of high-quality Trak Racer seats

  • Premium race-ready high-grade seat with hardback
  • Adjustable driving position seat
  • Ergonomically designed for extended periods of use
  • High-density foam construction
  • Weight Restrictions: Up to 160kg (352 lbs)
  • Suggested Waist Size: GT-Style (up to 38"), Rally-Style (up to 44") and Recline seats (up to 50")
  • Contact Trak Racer for other available seat sizes

Specifications:

  • Includes all aluminium profiles and mounting gear
  • The main Chassis is an 8-Slot 120 x 40mm profile
  • Steering wheel uprights are 8-Slot 120 x 40mm profiles

Compatible Wheel Bases

Note: TR One Wheel Mounts are also suitable for Fanatec Direct Drive Wheels (Podium, CSL and Pro)

The more Traditional and Fully Adjustable Wheel Deck Mount is fully adjustable (back/forth and up/down angle) and is made out of thick Laser Cut Carbon Steel. This bracket is compatible with the following wheels:

  • Thrustmaster T500, T300, T150, TC-PS, TS-XW, TX, 248, T-GT, T80, TMX and T-GT II
  • Logitech G25, G27, G29, G920, G923
  • Fanatec Elite, Clubsport, Podium DD1/DD2 and CSL DD
  • AccuForce V1/V2
  • SIMAGIC M10
  • Fanatec Podium DD1/DD2, DD PRO and CSL DD (by removing the center mount)

Also, Flight/Heavy Equipment

  • Logitech Flight Yoke System (by clamp)
  • Logitech Flight Switch/Multi/Instrument Panels 
  • Logitech Heavy Equipment 

Other Wheel Bases - may require mounting bracket (Trak Racer Direct Drive Mount recommended)

  • MiGe 130ST(small and big) - additional mount required
  • Bodnar 53 series - additional mount required
  • Simucube SC1 / SC2 Sport, Pro, Ultimate -additional mount required
  • SIMAGIC ALPHA / ALPHA Mini - additional mount required

Contact us if your wheel is not listed

Compatible Pedals - Pre-Drilled Pedal Plate

  • Fanatec CSL Elite Pedals, ClubSport V1/V2/V3 (including Inverted Pedals)
  • Thrustmaster T-LCM, T3PA, GT Ed, T3PGT, T3PA PRO add-on and T500, T150 pedals
  • Trak Racer Loadcell Pro Pedals (Coming Soon)
  • Heusinkveld Ultimate/Ultimate+, Sprint and Pro
  • Logitech G29, G920, G923
  • Meca Cup1-2, Meca Cup1-3, Clutch and Base Plate
  • VRS DirectForce Pro Pedals
  • HPP PRX 3P, JBV 2/3 Pedal System 
  • Simagic P2000-S100 Pedal Set
  • BJ Sim Racing Steel Series, 1000psi Hydraulic
  • DC Sim Racing DC3
  • Sim Coaches P1-3
  • Simtrecs ProPedal GT
  • Asetek Hydraulic
  • Velazquez Engineering PRO+ Hydraulic
  • Simforge Mark-1
  • 3DRAP Ngasa
  • Protosimtech PT2
  • OBP Pro Race V2 Sim Pedal System
  • Simworx Pro Series
  • WAVE IMPETUS
  • Quaife Throttle Pedal and Brake
  • Cube Controls Hydraulic

Also, Flight/Heavy Equipment

  • Thrustmaster TPR: THRUSTMASTER PENDULAR RUDDER
  • Thrustmaster T.Flight Rudder Pedals
  • Logitech Flight Rudder Pedals
  • Logitech Heavy Equipment 

Contact us if your product is not listed

Compatible Pedals - Direct Fit Aluminium Profile with Heel Plate

  • Trak Racer Loadcell Pro Pedals (Coming Soon)
  • Heusinkveld Ultimate/Ultimate+, Sprint and Pro
  • Meca Cup1-2, Meca Cup1-3, Clutch and Base Plate
  • VRS DirectForce Pro Pedals
  • HPP PRX 3P, JBV 2/3 Pedal System 
  • Simagic P2000-S100 Pedal Set
  • BJ Sim Racing Steel Series, 1000psi Hydraulic
  • DC Sim Racing DC3
  • Sim Coaches P1-3
  • Simtrecs ProPedal GT
  • Asetek Hydraulic
  • Velazquez Engineering PRO+ Hydraulic
  • Simforge Mark-1
  • 3DRAP Ngasa
  • Protosimtech PT2
  • OBP Pro Race V2 Sim Pedal System
  • Simworx Pro Series
  • WAVE IMPETUS
  • Quaife Throttle Pedal and Brake
  • Cube Controls Hydraulic


Contact us if your product is not listed

Compatible Shifters - the Shifter Mount Assembly is an Optional Accessory and not included 

  • Fanatec ClubSport Shifter, SQ
  • Thrustmaster TH8A, RSTSS, TSS+
  • Prosim PSL Sequential Shifter 
  • Trak Racer Sequential Shifter Pro (Coming Soon)
  • Heusinkveld SQ Shifter
  • Logitech G Shifter
  • DSD SQ Shifter
  • Jinx Shifter - additional mount required
  • Simworx Pro Series - additional mount required
  • VNM Simulation Sequential Shifter
  • Quaife PSL Sequential V2, Sequential and H Pattern - additional mount required
  • Aiologs SQ Shifter
  • BJ Sim Racing Shifter 3.0
  • Frex H Pattern

Contact us if your Product is not listed - Handbrake mounts are also available

 

About Trak Racer

Since 2008 Trak Racer has been pioneering the Sim Racing industry with great value and well-designed products. In recent years, Extruded aluminium has come into the sim racing space for benefits such as its strength, expandability and minimal setup costs for the manufacturer when compared to other simulators on the market like the Trak Racer RS6 and TR8.
Disadvantages of this type of simulator are additional setup time and more industrial aesthetics.

Extruded aluminium is a fixed cross-sectional length of aluminium, which has portions “removed” along the length, known as extrusions. This allows for the connection of multiple separate lengths of extruded aluminium which can be used to build simple to very complex structures using a nut that slides into the extrusion and securing with a screw. 80/20 is a registered brand of extruded aluminium (among many others) which is often interchanged with the generic term “extruded aluminium”. Because of its versatility and expandability, extruded aluminium is often used for creating racing simulators. The most common type of extrusion used for sim rigs is “t-slot extruded aluminium”. It features a t-shaped extrusion (most commonly on all sides).

Subscribe to our newsletter

Subscribe to our newsletter so you will be informed about exclusive offers, new product launches, discount codes and much more.

We deliver to Europe

If you do not find your location on the list, contact us so we can come up with a solution together

Warranty and easy returns

We offer at least two year warranty for most of our products

Top-notch support

Should you need help with your purchase, don't hesitate to email contact@dele.io

Secure payments

Choose the payment type of your preference from a wide range of safe choices