Asetek Invicta™ S-Series Brake & Throttle

The Asetek Invicta™ S-Series Brake & Throttle, as you know, is simply a separation of the brake and throttle from the Invicta™ Pedal.

This version of the Invicta™ Sim Racing Pedals allows you to adjust the distance between the throttle and brake. This feature lets you design your Sim Racing setup to your preference.

The Invicta™ S-Series brake and throttle are high-end pedals designed with the feel, durability, and ease of use of a real racing car in mind. If you're using Asetek SimSports RaceHub™ software, the Sim Racing pedals can be connected and played right out of the box, and perfectly adjusted to your needs immediately.

T.H.O.R.P.™ (Twin Hydraulic Opposing Rapid Pistons) is Asetek SimSports' hydraulic brake cylinder, providing racers with the ultimate experience of driving a real racing car. This pedal is "Made in Denmark," with design, manufacturing, and assembly all done in Denmark. The brake cylinder uses an automotive pressure sensor, enabling the most realistic braking experience in Sim Racing.

If you're looking for endless freedom in your Sim Racing setup without compromising on pedal quality, the Invicta™ S-Series brake and throttle are definitely the right choice for you.

Compatible with Invicta™ Throttle Footrest: An easily attachable accessory that allows you to rest your feet during long races.

Technical specifications

• Exquisite, sharp, and minimal Danish industrial design (Community design registration number 009148265-0001/0002/0003)
• Adjustable pedal stop
• Adjustable travel settings
• All-black anodized pedal base, pedal arms, and pedal plates with CNC machined contrast cut surfaces
• The pedal base includes a built-in heel rest and RGB LED that can be adjusted, dimmed, or completely turned off through RaceHub software
• Adjustable pedal plate in the X and Y axes
• Calibrations done in RaceHub are automatically saved to EPROM (Erasable Programmable Read-Only Memory). As a result, calibrations (pressure, dead zones, etc.) are stored for each simulator or game. (In games, you need to set values for 0 and 100%.)
• Whether using two or three pedals, only one USB connection from the pedal base to the PC is needed
• Calibration of each pedal can be done easily with the intuitive and user-friendly RaceHub software
• Top and bottom dead points of the pedal can be set in RaceHub software
• All adjustable mechanical features are default set to orange
• In-house developed electronics and automotive pressure sensors with 16-bit resolution
• Sock-friendly smooth pedal plates available as an option
• Easy addition of a clutch pedal to the throttle & brake combo
• Made in Denmark
• Sustainable manufacturing method that reuses 100% of waste on-site
• Designed and tested for over a million activations, far exceeding racing car specs

Brake system

• The patent-pending T.H.O.R.P. (Twin Hydraulic Opposing Rapid Pistons) hydraulic brake cylinder offers the ultimate experience of driving a real racing car
• Aluminum die-cast zero-play pedal arm with long-life ball bearings and bronze bush in the clevis pivot area
• Sustainable manufacturing method that reuses 100% of waste on-site
• Automotive pressure sensor
• In-house designed brake cylinder features sophisticated CNC machined details, enhancing the overall appearance
• Hardness adjustable with three types of elastomers, incorporating a physical stop and expansion chamber to replicate the perfect feel of a racing car while preventing excessive strain on the elastomers
• Manual adjustment of initial touch hardness to replicate the feel of the distance between the brake pad and disc
• Pressure sensor measures 0~100bar - tested to withstand repeated pressure up to 100bar. (Seal burst pressure is 130bar)
• 100 bar pressure corresponds to applying 180kg of force on the pedal plate surface
• Aluminum forged hydraulic brake cylinder
• The pedal arm is designed to withstand 200kg of force and up to 700kg of burst pressure

Throttle system

• Aluminum die-cast zero-play pedal arm with long-life ball bearings and bronze bush in the clevis pivot area. Sustainable manufacturing method that reuses 100% of waste on-site
• 16-bit magnetic contactless hall TPS (Throttle Position Sensor) with no mechanical wear and no need for maintenance
• With RaceHub software, you can adjust and 100% customize the custom throttle curve that mimics the butterfly opening of a real racing car. For example, you can create a linear curve for dry conditions and a progressive curve for wet conditions
• Adjustable pedal hardness, travel, and stop
• Spring replacement for significant changes in pedal hardness
• The pedal arm is designed to withstand 200kg of force, up to 700kg of burst pressure

Dimensions

• Depth x Width x Height: 457mm x 212mm x 256mm
• Product weight: 3kg